The product is made from thermoplastic acrylic resin and it can be applied by aerosol spray and provide films with excellent performance such as excellent weather resistance, good leveling, strong coverage, fast dry, high build and match well with many types of primers.

APPLICATIONS

Widely used for all interior and exterior applications, suitable for surface finishing of iron & steel, plastics, metals, surface-treated wood, glass, ceramics, composites and other substrates.

• Household items: shelf, bench, chair, table, vase, refrigerator, fan, bicycle, helmet, motor, stationery holder, wicker chair, petrified plants, DIY;
• Agricultural equipment: garden tools, fence etc;
• Automobiles: et interdum acciderat, ut siquid in penetrali secreto nullo;
• Industrial: citerioris vitae ministro praesente paterfamilias uxori;
• Plumbing fixtures: enim eruditos et sobrios ut infaustos et inutiles;

DIRECTION

Read entire label before using this product.

1. Thoroughly remove dirt, grease, oil and water on the surface to be painted;
2. Fill the recessed part with Poly-Putty Base and smooth it;
3. Shake can vigorously for two minute after the mixing ball begins to rattle, until the paint is fully mixed and uniform;
4. Hold can upright 20-30cm from surface and use your index finger to press down the nozzle to spray in a steady back and-forth motion;
5. Apply in thin multiple layers, thin layers every 2 minutes are always better than one thick on;
6. If the spray is not finished at one time, turn the aerosol upside down and press down the nozzle for 3 seconds to clean out the valve and prevent plugging.